Ferrari 458 Speciale, 2014

 

 

•  Ferrari 458 Speciale, 2014

The Ferrari 458 Speciale joins the Ferrari range alongside the 458 Italia and 458 Spider and, like all special-series Ferraris, is aimed at a specific kind of owner, in the case those looking for an even more focused sports car that offers extreme driving emotions.

Whether on the road or on the track, drivers will feel immediately at one with the 458 Speciale thanks to the speed with which it responds to every input and the consequently natural control that it offers, even in extreme manouvers. This finely-tuned handling balance enables the car to reach the highest performance levels of any Ferrari V8.

Ferrari's core engineering philosophy centres around pushing the envelope with each new model whilst maintaining the innate chassis balance and handling that ensures that even non-professional drivers can extract maximum performance and driving pleasure. With the new Ferrari 458 Speciale all clients will be able to drive on the limit on the track as well as experience the exhilaration of genuinely sporty driving even at lower speeds on demanding roads.

The new berlinetta is, in fact, the result of the search for extreme technology, driving thrills and performance, with the application of advanced technical solutions for the power train, aerodynamics and vehicle dynamics. Those achievements set it apart from the 458 Italia from which it is derived, to an extent unprecedented in the previous Challenge Stradale and 430 Scuderia special series.

The 458 Speciale's performance is exceptional across the board, an extraordinary weight-power ratio of 2.13 kg/cv, 0-100 km/h longitudinal acceleration in 3 seconds, lateral acceleration of 1.33 g and a Fiorano lap time of 1'23"5. The Ferrari 458 Speciale is an extremely entertaining car to drive even in less extreme situations, too: its unparalleled agility, in fact, is reflected in a response time to commands of just 0.060 seconds.

POWERTRAIN
The 458 Speciale's mid-rear-mounted 4497 cc GDI engine is the most powerful naturally aspirated Ferrari 8-cylinder ever developed, punching out 605 cv at 9000 rpm and maximum torque of 540 Nm at 6000 rpm, while its record 135 cv/l specific power output is also the highest ever achieved by a naturally-aspirated road-going engine.

F1 technology transfer to the Ferrari 458 Speciale was of fundamental importance to its development, including the production processes. The engine is produced in the factory's in-house foundry using the same machinery and processes as employed by the F1 team for complex components with the extreme structural and dimensional characteristics needed for a naturally-aspirated engine capable of hitting 9000 rpm.

To achieve these results, Maranello's engineers have maximised the 458's V8 potential, carrying out detailed refinements to all the components to optimise combustion, volumetric and mechanical efficiency.

Maximum combustion efficiency is guaranteed by a highly evolved knock control system which senses the ionisation across the spark plug gap thereby optimising combustion across the entire rev range.

The other main challenge aside from boosting power was to improve torque across the entire power curve. This involved increasing the compression ratio to an exceptional 14:1, the highest value ever achieved by a naturally-aspirated V8, which was achieved by modifying piston geometries.

The fluid-dynamics of the combustion chamber were revised to optimise both the intake and exhaust phases. The intakes feature new geometry, both with regard to the manifolds and the cylinder heads, with shorter inlet ducts (-10 mm) in the former instance, and in the latter a higher valve lift (+5%). A new cam profile not only increases valve lift but also helps reduce average pressure during the pumping cycle.

The 458 Speciale's increased power and torque are also the result of redesigning various engine components and reducing internal friction. The pistons are made from a new material that reduces overall mass. New materials were also used for the con-rod bushings while specific heat treatment (DLC: Diamond-Like Carbon) on the piston pins makes for greater fatigue and wear resistance. The crankshaft was also redesigned to optimise and improve lubrication of the main bearings in all conditions of use.

Around 8 kg was also slashed off the engine's overall weight by the redesign of the intake (carbon-fibre plenums and air filter box as well as shortened inlet ducts) and exhaust (in aluminium) systems. Once again Ferrari drew heavily on its extensive F1 experience, particularly with regard to the intake system, which now has a new carbon-fibre plenum and filter box, new materials for the pistons and con-rod bearings.

AERODYNAMICS
One of the car's main characteristics is new Ferrari-patented mobile aerodynamic solutions at the front and the rear of the car which ensure that different aerodynamic configurations can be adopted in cornering, where maximum downforce is essential, and on straights where, instead, drag must be reduced to a minimum.

The 458 Speciale has an excellent down force (Cl) value of 0.53. Thanks to the aforementioned active aerodynamics, the latter does not penalise the Cd which is just 0.35.

Of particular note are the innovative solutions adopted at the front of the car, with two vertical flaps in the centre and the horizontal flap below them. At relatively low speeds, the vertical flaps are closed, channelling air into the radiators to guarantee the necessary cooling for the engine. However, at speeds in excess of 170 km/h, the flaps open, reducing the volume of air flowing into the radiators, thereby cutting drag. At speeds of over 220km/h the horizontal flap lowers to balance downforce between the front and rear axles, leading to a 20 per cent shift in overall down force towards the rear.

The turning vanes at either side of the front bumper slow the air flow which increases downforce, thereby shifting the aerodynamic balance 4 per cent over the front. The aerodynamic fins ahead of the rear wheels increase down force very much in the same way as the front turning vanes.

The rear spoiler has a larger surface area and more pronounced shape which has improved the efficiency of the under body, increasing downforce. Moving the position of the tailpipes also allowed a new diffuser to be designed which optimises the extraction capacity of the underbody. The rear flaps have two different configurations: raised for high downforce and lowered to minimise drag. Sophisticated sensors and a specific algorithm allow the flaps to be lowered by as much as a 17° angle, thereby stalling the diffuser and reducing Cd by 3 points.

DYNAMICS
The Ferrari 458 Speciale's dynamic behaviour guarantees maximum driving emotions in all situations, allowing drivers to match and improve their own limits with ease and delivering an intense driving experience even at lower speeds.

Nimble and responsive, the car is at its best over really twisty routes with demanding switchbacks and camber changes. New technical features have not only improved the 458 Speciale's lap time over single laps, but also the repeatability of that performance on subsequent laps without needing to be a professional driver, offering unprecedented levels of driving pleasure.

Side Slip Angle Control (SSC)
The Ferrari 458 Speciale sees the introduction of Side Slip Angle Control (SSC) for more effortless car control on the limit, thereby greatly enhancing driver enjoyment.

Thanks to sophisticated new software, which computes lateral acceleration, yaw angle, steering wheel angle and speed, SSC carries out instantaneous analysis of the car's side slip angle, comparing it with reference data, thereby allowing smooth, controllable oversteer, and optimising both torque management (via F1-Trac traction control) and differential torque distribution between the two driven wheels (via the E-Diff electronic differential) for maximum vehicle response times.

With the Manettino set at RACE or CT OFF, the 458 Speciale will then make the most of available grip for improved acceleration out of corners, greater ease and control on the limit, and more consistent performance.

Also available on request is an advanced telemetry system which records data from track sessions which can then be accessed directly through the multimedia menu or via an external device such as an iPad or laptop. The system uses a series of high-precision GPS antennae installed in the car to pinpoint its position on a pre-loaded circuit or a recordable route. At the end of the session, the Virtual Track Engineer helps drivers analyse their performance, highlighting the main critical errors (e.g. braking too early or too late).

Braking system
To cope with the demands of the car's increased performance, all of the components in the Brembo braking system have been evolved from the solutions introduced on the La Ferrari. The 458 Speciale sports Extreme Design calipers, new generation HT2 discs with a higher percentage of silicon, and smaller front pads made from HY hybrid material for improved heat dissipation which is also boosted by special channels in the bodywork and is crucial in extreme driving situations. The result is shorter stopping distances (100 - 0 km/h in 31 m) without any compromises in weight, and more consistent performance under severe use.

Tyres and wheels
Part and parcel of the Speciale's development included Michelin Pilot Sport Cup2 tyres which were specifically honed for it in an intensive collaboration programme involving lengthy track tests and simulator sessions.

Specially made for the Ferrari 458 Speciale, they feature a compound obtained using specific additives to boost performance over a single lap in the dry as well as improving performance consistency over multiple laps. They also deliver 6 per cent more grip, which also translates into better grip even in the wet.

The forged 20" wheels feature a new design, resulting in a weight reduction of over 12 kg.

Suspension
Thanks to being very flat through corners, the 458 Speciale is extremely efficient and satisfying in faster, sharper, more challenging changes of direction. This is due partly to its Frequency-Shaped SCM-E (Frs SCM-E) dampers which have twin solenoids, new CPU and new software that modifies the magnetic field every millisecond. The result is a much faster response and more precise body control.

These technical features guarantee exceptionally fast response to inputs from the road or the steering (0.060 s) and mean the car can deliver 1.33 g of lateral acceleration, a combination that ensures a genuinely extraordinary experience behind the wheel. The car, in fact, responds instantaneously and is easy to drive on the limit in all types of situations.

Soundtrack
Like the rest of the car, the Ferrari 458 Speciale's soundtrack is both seductive and uncompromising, thanks to unprecedented intensity inside the cabin as well as outside. The position of the tailpipes lends the V8 the full-bodied low frequency soundtrack typical of Ferrari's sportiest engines while the configuration of the silencers is designed to guarantee maximum intensity and exceptional clarity. The immense power and full-bodied nature of the sound inside the cabin were achieved by redesigning the inlet tract.

Gear-shift strategy
The F1 dual-clutch transmission now features a new control logic that delivers an even keener sense of urgency during gear shifts. The car feels much sportier as it shifts up through the gears, with response time to commands more prompt than ever, thereby guaranteeing 40 per cent faster longitudinal acceleration with engine revs adapting 20 per cent more rapidly. Conversely with the Fast-Down Shift strategy, when down-shifting, the transient time required for engine revs to match the gear ratio is 44 per cent faster.

DESIGN
Aerodynamic requirements guided the work of the Ferrari Styling Centre which collaborated on the project with Pininfarina to sculpt forms that are more performance-oriented than ever, balancing aerodynamic requirements while staying true to Ferrari's aesthetic philosophy.

Most of the bodywork panels have been redesigned without modifying either the passenger cell or the signature design features of the 458 Italia. The thickness of the glass used has been reduced to cut weight, while the rear windscreen is now a Lexan© panel.

The composite bumpers have been redesigned and the front bonnet now features two deep air outlets to channel away the air exiting the radiator.

Interior
The cockpit features a distinctly racing-inspired atmosphere, with simplicity the order of the day. Lightweight exclusive technical materials, such as Alcantara and carbon-fibre, are used extensively but meld seamlessly with the superb craftsmanship and sophistication typical of all Ferrari interiors, courtesy of exclusive details, contrasting hand-stitching, aluminium triangular-pattern tread plates and sills with a pewter grey finish, and particularly fluidly sculpted door panels.

The glove compartment on the dash has been replaced with convenient odds and ends pockets on the tunnel and doors. This has significantly streamlined the volumes under the dash adding practical padding at knee level.

The Sabelt seats have carbon-fibre shells and boast excellent side bolstering thanks to an ergonomic design which also helps contain weight. The shoulder-rests are trimmed in Alcantara for improved grip while seated and the backrests are padded with a breathable 3D fabric to guarantee excellent air circulation and comfort.

The Ferrari 458 Speciale is being unveiled in an unusual red livery featuring a blue and white central stripe inspired by the historic NART (North America Racing Team) livery which is available on request. Characterised by five exceptionally slender spokes, its newly designed forged wheels are available in gold, dark grey and black.

SPECIFICATIONS

•     Engine type : V8 - 90°
•     Total displacement: 4495 cm3
•     Max. power output: 605 cv @ 9000 rpm
•     Max. torque: 540 Nm @ 6000 rpm
•     Weight: 1290 kg
•     Weight/power ratio: 2.13 kg/cv

    Performance
        0-100 km/h: 3.0s
        0-200 km/h: 9.1s
        Top speed: >325 km/h (>202 mph)
    Fiorano lap time: 1'23"5
    CO2 emissions: 275 gr/km (with HELE System)

Ferrari 458 Spider, 2013

 

 

 

 

 

 

 

•  Ferrari 458 Spider, 2013

The new Ferrari 458 Spider joins the 458 Italia, widening the range of Ferrari's mid-rear engined V8s and offering the same uncompromising technological solutions, handling and performance in a refined open-top configuration. It is equipped with a Ferrari patented, fully retractable hard top, a world first for a sports car with this lay-out.

The Ferrari 458 Spider is powered by Ferrari's 570 CV 4,499 cc V8 which was named International Engine of the Year 2011. The power is transferred to the road by Ferrari's class-leading dual-clutch F1 paddle-shift transmission through the sophisticated E-Diff, itself integrated with the F1-Trac traction control and high-performance ABS for maximum handling dynamics. The car delivers 0 to 100 km/h acceleration in under 3.4 seconds and a top speed of 320 km/h.

Certain features, such as its accelerator pedal mapping and the damping of the multilink suspension, have been calibrated to guarantee maximum sportiness and absolute driving pleasure with the top down, in line with Maranello's exclusive spider tradition. Even the engine soundtrack has been honed to ensure that the car's occupants are completely captivated by the drop-top driving experience.

Entirely in aluminium, the hard-top solution adopted for the Ferrari 458 Spider offers a number of advantages over the traditional folding soft-top, including a reduction of 25 kg in weight compared to Ferrari F430 Spider and a deployment time of just 14 seconds. Fully integrated into the styling of the car, the hard-top was engineered to fit neatly ahead of the engine bay without compromising aerodynamics or the performance of the car. The small space needed to house the roof enables the designers to include a generous rear bench for luggage behind the seats.

The rear of the car is characterised by innovative forms with the buttresses designed to optimise the flow of air to the engine intakes and the clutch and gearbox oil radiators. For maximum comfort whilst driving top down the Ferrari 458 Spider features a generously-sized adjustable electric wind stop. The design was perfected to slow and diffuse the air in the cockpit, enabling normal conversation to be held even at speeds over 200 km/h.

New technical solutions adopted for the chassis guarantee identical levels of structural rigidity with the roof up or down. The result is a car that is truly exciting to drive, blending extreme performance with the responsiveness that has always characterised Ferrari's open-top berlinettas.

Its category-topping performance aside, the new car also boasts class-leading fuel consumption and emissions levels. Thanks to the HELE (High Emotion Low Emission) system, in fact, fuel consumption on the combined urban cycle stands at 11.8 l/100 km with CO2 emissions of 275 g/km.

Ferrari 458 Spider - Technical Specification
    Engine
        Longitudinal mid-rear V8
        Bore/stroke: 94 x 81 mm
        Displacement: 4499 cc
        Maximum power: 570 CV (562 hp) @ 9000 rpm
        Maximum torque: 540 Nm @ 6000 rpm
        Maximum revs: 9000 rpm
        Compression ratio: 12.5:1
        Specific power: 127 CV (125 hp) per litre
        Weight/power ratio: 2.51 kg/CV
        Direct injection
        Dry sump lubrication

    Performance
        0-100 km/h: 3.4 s
        0-200 km/h: 10.8 s
        100-0 km/h: 32.8 m
        Top speed: 320 km/h
    Price: €226,800 (Italy - OTR)

Ferrari 458 Italia Grand Am, 2012

 

•  Ferrari 458 Italia Grand Am, 2012

The Ferrari 458 Italia Grand Am back in action on 26 and 27 July, 2011 for a private test session at Florida's Daytona International Speedway. Taking turns at the wheel will be the tried and tested duo of Jaime Melo and Toni Vilander who can pride themselves of having an extensive list of wins to their name in Ferraris. They will continue development work on the Ferrari 458 Italia Grand Am in preparation for its participation in the 2012 American championship.

The Ferrari 458 Grand Am is built to match the American regulations and is therefore different to the European car, especially in that it develops 500 horsepower and has less efficient aerodynamics than the GT version. It is also fitted with a 48 mm restrictor and maximum revs are 8000. Significant modifications have been made to the braking system, as the car has neither ABS nor traction control. Other differences to the GT3 include the roll-over bar which gives greater lateral protection to increase safety in a series in which collisions are rather more frequent. The car is fitted with tyres from Continental, the sole supplier to the series, featuring a very hard compound, again to conform with the series regulations. On its shakedown today, it completed a good number of trouble-free laps, 45 to be precise in the hands of Maurizio Mediani and Jaime Melo, as they took turns at the wheel.

Daytona recalls many memories of past Ferrari victories in the famous 24 Hour race, the company having close links with this important event. In fact, Ferrari has taken part in 47 of these endurance races, winning five of them outright as well as taking 15 class wins.

Standing out in that list was an amazing clean sweep of the podium in 1967 for the two Ferrari 330 P4 and a 412 N.A.R.T., while back in 1962, Phil Hill and Ricardo Rodriguez won in a Dino 246 SP. That year, no less than four Ferraris finished in the top ten while in 1972, Mario Andretti and Jacky Ickx won in a 312 PB.

Ferrari SP12 EC, 2012

• Ferrari SP12 EC, 2012

For a Ferrari enthusiast and great musician like Eric Clapton a one-off car just had to be produced. Designed by the Centro Stile Ferrari in collaboration with Pininfarina and the engineers from Maranello, the Ferrari SP12 EC was created as homage to Clapton's career and his long lasting experience as a Ferrari owner.

The world-famous guitar player has been attached to one particular Ferrari model: the 512 BB, of which he has owned three over the years. So his desire was to drive a car inspired by this model, with influences from the multi-award winning 458 Italia. Exclusively in the latest issue of the Ferrari Official Magazine Eric Clapton talks about his passion and how the idea of a one-off car was born.

Meticulous attention in terms of style and technology was paid to the proportions and architecture of the SP12 EC - which is part of Ferrari's One-Off Programme - making this exceptional car even more significant. Just like music is created, applying the right notes in the right places to build a musical score, so was the creative process behind the Ferrari SP12 EC.

For Eric Clapton, following the project through from what was, essentially, a blank canvas, was 'one of the most satisfying things I've ever done." Unique and irreproducible like the final car.

Ferrari 458 Italia China 20th Anniversary, 2012

• Ferrari 458 Italia China 20th Anniversary, 2012

The year 2012 marks the 20th anniversary for Ferrari in China since the first Ferrari, a 348 TS, was ordered in Beijing. To celebrate this historical milestone, in a few weeks time Ferrari will inaugurate its first ever permanent brand exhibition outside of Maranello at the Italia Center of Shanghai World Expo Park. Covering 900 square metres the Ferrari Exhibition will last for three years and will feature some of the best collections from the Maranello Museum divided into five topics, including Ferrari in China, Green Technology, Product, Design and Racing.

Along with current and past Ferrari models, visitors will gain first-hand experience with a rich selection of images and videos made especially for this exhibition.

Other important element for the 20th anniversary celebration is the introduction of the Ferrari 458 Italia special edition of only 20 cars dedicated exclusively to the China market. The car's livery is characterized by unique Chinese elements and is finished in a brand new colour called Marco Polo Red specially developed for this exclusive car which will be presented at the inauguration of the Ferrari Exhibition at the Shanghai Expo Park's Italian Center.

The inspiration behind the livery came from the longma theme which is an old Chinese idiom which means "the vigor and spirit of the legendary dragon-horse". Dragon is a symbol of Chinese culture, standing for courage, passion and success, whilst Ferrari's prancing horse logo is one of the most recognized symbols in the world representing Italian cultural identity and its unrivalled achievements in the design and engineering fields.

The Ferrari 458 Italia is a very high performing and exclusive 8 cylinder mid-rear engined car which has won over 35 awards all around the world. The 458 Italia mixes very innovative technology with exclusivity and design and it perfectly encapsulates the passion and vitality of the longma spirit.

The most eye-catching element of the car's exterior is the golden dragon on the front bonnet, which is offset by gold and black livery stripes symbolizing a racing track. The image of the soaring dragon and the prancing horse on the front bonnet complement each other perfectly, and are the finishing touch to the car's overall design. The symbols reflect both Chinese culture as well as Ferrari's constant innovation.

The unique design is enhanced by gold finish to the rims and the aeroelastic winglets. The interior also reflects the unique longma spirit and the celebration of Chinese culture with gold embroidery on the car's head rests, while the engine start button on each of the 20 cars is inscribed with the simplified Chinese characters for 'start', and a '20th Anniversary Special Edition' plaque is set into the dash.

Ferrari P540 Superfast Aperta, 2011

 

Ferrari P540 Superfast Aperta, 2011

The first shake-down has been held at Fiorano of a very special one-off, the Ferrari P540 Superfast Aperta, built for an American client. The second in a new Special Projects programme created by Ferrari to meet requests from the most discerning clients and collectors to create truly unique models, is based on the Ferrari 599 GTB Fiorano and was inspired by a Carrozzeria Fantuzzi-designed Ferrari built specifically for the 1968 Fellini film, Toby Dammit, itself inspired by one of the tales of Edgar Allan Poe.

The Special Project's approach to producing such individual one-offs, the Ferrari P540 Superfast Aperta respects all existing international safety and homologation requirements and is thus road legal. The car was designed by Pininfarina and built in Maranello, and the client was directly involved in each stage of its development. The 599 GTB Fiorano donor car is a coupé, considerable effort went into strengthening the chassis by using finite element analysis in development and the increase in weight was kept down to just 20 kg by employing carbon-fibre extensively. From the initial sketches to the final, road-legal car took just 14 months.

Technical specifications :

    = Length: 4731 mm
    = Width: 1954 mm
    = Height: 1300 mm
    = Wheelbase: 2750 mm
    = Front track: 1690 mm
    = Rear track: 1620 mm
    = Engine
          o Type: 65° V12
          o Displacement: 5999 cc
          o Maximum power: 456 kW (620 CV) at 7600 rpm
          o Maximum torque: 608 Nm (62 kgm) at 5600 rpm
    = Transmission: F1 6-speed gearbox
    = Tyres
          o Front: 245/35 20"
          o Rear: 305/35 20"
    = Fuel consumption
          o Combined cycle: 17.9 l/100 km
          o CO2 emissions: 415 g/km

Ferrari 458 Italia, 2011

 

 

Ferrari 458 Italia, 2011

Ferrari 599XX, 2010

 

Ferrari 599XX, 2010

The Ferrari 599XX, while based on the Ferrari 599 GTB Fiorano with the same transaxle layout and engine type, is an extreme track car. Ferrari's engineers have carried out extensive work on the engine's combustion chambers and inlet and exhaust tracts. The modifications, combined with the fact that internal attrition has been reduced and the maximum revs have been boosted to 9,000 rpm, helped achieve the target power output of 700 hp at 9,000 rpm. Particular attention was also paid to cutting the weight of the engine unit components. This was achieved both by optimising forms - as in the new crankshaft - and adopting exclusive materials, as in the carbon-fibre used for the intake plenums. A new gearbox shift strategy cuts overall gearchange times to 60 ms.

The Ferrari 599XX is characterised by an innovative electronic concept called the "High Performance Dynamic Concept" which has been designed to get the maximum performance from the car by managing the combination of the car's mechanical limits with the potential of its electronic controls. The mechanical and electronic systems work together to get the maximum performance from the car under extreme high performance driving, for consistent lap times. The sporty handling has been improved thanks to the adoption of second generation SCM suspension system. Track usage is also made easier thanks to the new "virtual car engineer", a screen in the car that provides a real-time indication of the vehicle's efficiency.

The Ferrari 599XX's aerodynamics were honed in numerous wind tunnel test sessions with the result that the car now boasts 280 kg of downforce at 200 km/h (630 kg at 300 km/h). The front underside of the body is completely faired-in and the vents that channel hot air from the engine bay have been moved to the bonnet.

The "ActiflowT" system increases downforce and/or cuts drag depending on the car's trim cornering conditions, courtesy of the use of a porous material in the diffuser and two fans in the boot which channel the air flow from under the car out through two grilles next to the tail-lights. Winglets have been added to the rear buttresses to increase downforce. while synthetic jets have also been incorporated into the rear of the car to control and smooth the air flow and to reduce drag.

The Ferrari's engineers have also used F1-derived "doughnuts" which partly cover the brake discs and wheel rim. These have the dual function of improving both aerodynamics and brake cooling.

In terms of the bodywork, composites and carbon-fibre have been widely used and the engineers drew on their experience in working with aluminium to reach the weight target. The development of increasingly high-performance materials has also benefited the carbon-ceramic material braking system. The brake pads are now made from carbon-fibre which means that the calipers are smaller whilst guaranteeing the same efficiency. The new racing carbon ceramic braking system also delivers shorter braking distances and is generally more efficient due to the weight saving.

The Ferrari 599XX comes with slick tyres (29/67 R19 Front and 31/71 R19 Rear) specifically developed to maximise stability in cornering and increase lateral acceleration. They are fitted to 19 x 11J wheel rims at the front and 19 x 12J at the rear.

Ferrari 599 GTB Fiorano HGTE, 2010

 

 

 

Ferrari 599 GTB Fiorano HGTE, 2010

The Ferrari 599 GTB Fiorano set a new standard in terms of performance that remains a benchmark for new sports car development to this day. Now Ferrari is introducing the new Ferrari 599 GTB Fiorano HGTE (Handling Gran Turismo Evoluzione) package for the model to further underscore its sportiness and handling.

The package includes a modified set-up with stiffer springs and rear anti-roll bar as well as new calibration settings for the magnetorheological shock absorbers when the manettino is at its sportier settings. The ride height has also been lowered which in turn lowers the car's centre of gravity. This combined with the new set-up helps improve body control. The package also includes specifically optimised tyres featuring a compound that offers even better grip.

The car's electronics have also evolved to ensure even more prompt response to driver commands. The F1 gearbox's shifts are now even faster in high-performance settings, while a new engine software strategy has improved accelerator response.
The exhaust silencer has also been modified with the result producing an even more marked and thrilling sound under hard usage whilst still delivering just the right comfort levels at cruising speed.

The 20" split-rim wheels are new with a special diamond-cut and matte silver finish. The rear diffuser is finished in matte black to underscore the car's new set-up and highlight the chromed tail pipes. The cabin is sportier too thanks to a sophisticated mix of full-grain leather, black Alcantara and carbon-fibre trim.

The new seats are trimmed in a new two-tone combination of leather with black Alcantara inserts, and the seat backs are trimmed entirely in carbon-fibre. Embroidered in contrasting stitching on the headrest are a Prancing Horse and the words "Handling GTE".

Ferrari 599 GTB HY-KERS Concept, 2010

 

Ferrari 599 GTB HY-KERS Concept, 2010

The Ferrari at the 2010 Geneva Motor Show gives the public its first glimpse of the HY-KERS vettura laboratorio which can reduce CO2 emissions by 35 per cent on the combined cycle (ECE + EUDC). The HY-KERS is based on the 599 GTB Fiorano but importantly, the technology may one day be fitted to all future Ferraris, 8- and 12-cylinders alike, regardless of their engine position. Thanks to ongoing research combined with experience gained in Formula 1, the new technology developed at Maranello actually accentuates the cars' sporty character and driving involvement.

The one of the principle objectives of the project is ensuring that Ferrari will be in a position to comply with future CO2 emissions standards, particularly in terms of the urban cycle. City driving is traditionally where sports cars are most penalised as their engines are designed for maximum efficiency and performance at high revs, whereas the urban cycle involves low revs and low engine loads.

There are many original aspects to the new Ferrari hybrid transmission, starting with its architecture. Firstly, weight distribution has not been altered. This is thanks to positioning the batteries below the floorpan of the car, and the use of a compact electric motor coupled to the rear of the F1 dual-clutch gearbox. Not only does this layout not affect dynamic performance, it actually improves it, by lowering the centre of gravity. Cockpit room and luggage space are also unaffected.

Maranello's engineers also employed the Ferrari's track experience in the design, engineering and manufacture of this innovative electric motor which produces over 100 hp. The algorithms and control logics controlling the torque, traction and braking distribution functions are directly derived from Formula 1.

The solution adopted for the HY-KERS represents just one of the possible technologies for the future, but in the meantime Ferrari continues to evolve its models and increase their overall efficiency. Thus research continues into reducing drag, improving rolling resistance of tyres and lowering weight as well as working on reducing engine friction to increase efficiency.

The Ferrari's research into reducing energy consumption has not been focused merely on its cars however extends to the various production methods employed throughout the Maranello factory where the entire manufacturing process is carried out, from the foundry to the final assembly. In the course of 2010, Ferrari will cut CO2 emissions by 30,000 tons (-40 per cent) and Particulate Matter (PM) levels by 65 per cent. This will be achieved thanks to the company's photovoltaic system and Italy's largest trigeneration plant (which produces electricity, hot and cold water), making Ferrari entirely self-sufficient from an energy point of view.